Mantis ComposT-Twin Series, Owner'S Manual

Page: 17 / 28

The divider has the words “DOOR” printed
on the inside. Line up the words with the
door opening panel. Pick up the divider and
guide it so the threaded rods slip through the
four openings in the divider. Fit the rim of the divider over the open edge
of the sheet metal chamber, tapping to secure
in place.
Holding the threaded rods and
the end of the chamber, tilt the
chamber on its side. Thread an
acorn nut onto the exposed
thread on the outside of the
end cap. Repeat this step with
all four threaded rods.
Step 27
Step 28
Step 30
Step 29
17
Place the disposable
red protective covers
(key #35) on one end
of each threaded rod.
Holding the threaded rods
and the end of the chamber,
lift the chamber to rest on
the end cap once more.
Step 31