5
WHAT YOU’LL NEED
Tools:
None
Hardware:
None
Parts:
Item 4 - (1) Endcap
(2) Foam Pads
Drum body assembly (from step 1)
STEP 2 – DRUM ASSEMBLY
1.2
2.1
Align them by matching up the holes in the fins. Fasten the panels together with the screws (1a) and serrated
nuts (1b). Use the regular screwdriver and 3/8” wrench to tighten the nuts.
Remove 2 foam pads packaged inside of the cardboard spacer and place them on the floor. Place the endcap (Item 4) with the
“Compact ComposTumbler” lettering facing down—on the pads.
Cardboard Spacer
Foam Pads
Foam Pads
