STORAGE
• Allow the motor to cool down before storing.
• Store the Snow Shovel in a locked location in order to
prevent unauthorized use or damage.
• Store the Snow Shovel in a dry, well-ventilated area.
• Store the Snow Shovel out of the reach of children.
CLEANING
Use a small brush to clean the outside of the Snow Shovel. Do
not use strong detergents. Household cleaners that contain
aromatic oils such as pine and lemon, and solvents such as
kerosene can damage the plastic housing and handles. Wipe
off any moisture using a soft cloth.
TRANSPORTING THE SNOW SHOvEL
(Figure
6)
• Allow the motor to cool down before transporting.
• Secure the Snow Shovel while transporting.
• When moving the Snow Shovel, grasp it by the top and
auxiliary handles.
STARTING THE SNOW SHOvEL
(Figure 4-5)
Avoid accidental start-ups. Verify that the operator is in the
starting position when using the snow shovel. In order to
avoid serious injury, the operator and unit must be in a stable
position when starting the Snow Shovel.
Follow this sequence exactly in order to start the Snow Shovel.
1. Verify that the Snow Shovel is plugged in.
2. Press and hold the lock-out button.
3. While holding the lock-out button, press and hold the
trigger switch.
4. Hold the handles and begin to use the Snow Shovel.
STOPPING THE SNOW SHOvEL
1. Release the trigger switch.
2. The lock-out button will pop out, and the Snow Shovel
will stop.
USING THE SNOW SHOvEL
• Start the Snow Shovel by following the Starting
instructions. The depth and weight of the snow will
determine the forward speed.
• Push the Snow Shovel forward so that it rides on the
scraper.
• Verify that the power cord is attached to the cord retainer.
The power cord should trail to the side of the operator.
OPERATING TIPS
• Clear away the snow immediately after snowfall.
• For complete snow clearance, slightly overlap each
clearance pass.
• If possible, discharge the snow downwind.
• For safety and to prevent damage to the snow thrower,
keep the area to be cleared free of stones, toys and other
foreign objects.
AFTER USE
• Stop the motor.
• Disconnect the electric cable from the snow thrower and
the property’s power socket.
• Allow the snow thrower to cool for 30 minutes.
• Clean the inside and outside of the snow thrower with a
suitable brush.
• Check that there are no damaged or loose parts. Repair/
replace parts if necessary.
Storage & Transportation
Operation
10 8 Amp Electric Snow Shovel Operator’s Manual
Contact us at www.mantis.com
11
In order to avoid serious personal injury, turn the
Snow Shovel off and unplug it before cleaning or
servicing.
The snow thrower must never be rinsed with wa-
ter. Risk of damage to the electrical system and
risk of electric shocks.
FiGurE 4
FIGURE 6
FIGURE 5
NOTE: The Snow Shovel will not start if the lock-out
button is not held until the trigger switch is lifted.
Lock-out
button
Trigger switch
WARNING
WARNING