Mantis 7252, Owner'S Manual

Page: 9 / 24

C. Upper handle assembly
1. Attach the upper handle assembly (no. 1) – the
handle with the power cord – to the right lower
handle (no. 10) and secure with the handle knob
(no. 53). (Picture 1 and 2)
2. Follow the same steps to install the left upper
handle onto the left lower handle. (Picture 3)
3. Use the clip (no. 18) to secure the power cord
in place on the lower handle. (Picture 4)
4. Now install the handle brace (no. 14). Line it
up with the holes on the upper handles. Then
insert a bolt (no. 13) and a lock nut (no. 17) on
either side (Picture 5)
5. Use a wrench to tighten Bolt (no. 13) and
lock nuts (no. 17).
6. Now use wrench to tighten all nuts and bolts
firmly and securely.
Picture 1
Picture 2
Picture 3
Picture 5 Picture 4
WARNING DANGER
FOR PROPER INSTALLATION - THE HANDLE
WITH THE THROTTLE MUST BE ATTACHED
TO THE RIGHT SIDE LOWER HANDLE.
Electric tiller
7