MANTION SMT Adresse postale : 2 rue des Métiers 21110 Genlis
Tél. : (33) 03 80 37 85 71 Fax : (33) 03 80 37 88 61
16
ELECTRICAL CONNECTION
Identification of motors.
The leaf with the overlap is the first to open.
As standard the WIBAT APPLIQUE is prepared for shutters with an overlap as shown in the figure
below.
If the overlap is on the other leaf, you need to invert the switch.
Pay attention to your safety:
- The electrical installation must be carried out in accordance with the national standards in
force, as well as any obligations foreseen by the law and/or by all obligations in force, laid
down for this purpose.
- Electrical connection must take place without voltage: Do not connect the sector before
having disconnected all assembly operations.
- Do not use any switches other than those supplied in the kit (4)
- If the cables are damaged, contact our after-sale department.
Switch
Overlap
Top view of the
shutter
