MantelMount MM855 Installation Instructions Manual Download Page 1

Please read this entire manual before you begin. 

Do not unpack any contents until you verify all requirements on PAGE 3. 

If you have any questions, visit MantelMount.com or call 

(800)

897-9755.

 

 

 

This product contains small parts that can be a 
choking hazard. 

Do not

 let children play with any of 

these small parts! Keep children away from the work 
area during installation.

Do not use this product in any way, or for any
purpose, that is not specifically described in these
instructions. MantelMount is not responsible for
damage or injury caused by incorrect installation
or improper use.

MantelMount has three different adjustments 
that must be made after the installation is 
complete in order to operate properly.

IMPORTANT:

This product is intended to be installed by
professional installation contractors, or persons
familiar with the tools and methods required for
this installation. If you are not sure about your
ability to perform this installation, you must
contact a professional. MantelMount is not
responsible for damage or injury caused by
incorrect installation or improper use.

!

CAUTION:

!

CAUTION:

!

WARNING!

 

 

Do not let children operate, pull on, or hang from 
MantelMount. 
Do not operate MantelMount when anyone is near or 
behind the mount. MantelMount is very strong and can 
result in crushing injuries.  

!

WARNING!

!

WARNING!

 

 

Exceeding the weight capacity can result in
serious personal injury or damage to equipment! 
The combined weight of all components must not 
exceed 125 lbs (57 kg).   

 

 

MantelMount must be installed to a wall or structure 
that is able to hold five times the combined weight of 
all equipment. If you are unsure about your structure, 
a contractor must evaluate your installation.   

!

WARNING!

MM8

 Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MantelMount MM8

 

 

 

 

 

 

          PAGE 1

www.MantelMount.com

The bottom travel stop is adjusted 

with two screws and locknuts so 

the TV and mount do not lower all 

the way into the mantel.

Tilt is removed with one screw 

inside the swivel mechanism. The 

TV should always be vertically 

parallel to the wall

The side-to-side swivel stops are 

adjusted with two screws and 

locknuts so that the TV does not 

swivel into the mantel.

U.S. Pat. No. 8,864,092

Summary of Contents for MM855

















Reviews: