M
ANTARO
B
OT
T
ABLE
T
OP
T
ELE
M
E
Assembly Instructions &
Quick Start Guide
MantaroBot™
20410 Century Boulevard
Suite 120
Germantown Maryland 20874
www.MantaroBot.com
Phone 301 528 2244
Fax 301 528 1933
20
12.
The ‘Status’ tab should now display ACTIVE for MCS Admin and Controller Connection and
CONNECTED for Bluetooth Connection.
If the application cannot find the MCS activation key in the Downloads folder, it will fail with the
following message. Make sure the activation file is in downloads folder and try again.
13.
Next, the TableTop’s pan and the device holder’s tilt need to be calibrated. The tilt calibration is
different for each device holder. The information sheet that came with the product should have
the TableTop pan calibration value and the device holder tilt calibration value. Open the
‘Settings’ tab again and you will see the current Pan and Tilt correction values. For both the pan
and tilt correction, use the calibration values provided in your information sheet. Change the
numbers by pressing Left/Right for Pan and Up/Down for Tilt. In the example pictured below,
the pan correction value is 6 and tilt correction value is -5.
