MANTAFOILS VOLT 2 REMOTE, User Manual, Page: 5 / 30

Homescreen
Power ON the remote by long pressing the ‘O’ button. When remote is powered ON, the
homescreen will display the following:
1. The voltage of your E-foil
2. The GPS
3. The Remote Battery Voltage
4. Maximum power output. The Default is set to 25.
5. Remaining minutes: This indicates the remaining minutes of your ride time.
The remote needs to be paired to your e-foil to begin use.
100
25
NO GPS
REM-MIN
F
E-FOIL VOLTAGE
GPS
REMOTE BATTERY VOLTAGE
MAXIMUM POWER OUTPUT
REMAINING MINUTES
Single press the
‘O’ button to
switch Menu
Long press the
‘O’ button for
Power On/Off
2
The bars indicate signal
strength between the remote
and the receiver.
Foil battery charge should
appear, turning green.
The safety lock feature
will be activated when
receiver is paired
100
25
REM-MIN
F
LOCKED
85
Remote after pairing to
your e-foil
.
Follow the
instructions under
‘Connecting to the E-foil’
section to pair your remote.
Long press the ‘+’ button to
reset the ride.
Remote when powered
on the first time.