MMP12 Portable Air Conditioner
2
Note:
If the window opening is less than the above mentioned
minimum length of the window slider kit, cut that one with
a hole in it short to fit for the window opening. Do never cut
out the hole in window slider kit.
Important
Install the mobile air conditioner in a flat and spacio-
us location where the air outlets will not be covered up. A
minimum clearance of 30cm from a wall or other obstac-
les should be kept. The appliance shall not be used in the
laundry. The plug shall accessible after appliance is posi-
tioned. Wiring shall be done according to National rules.
Duct Mount installation
Temporary
1. Attach one end of the duct to the exhaust air outlet of
the mobile air condition, push it downwards, be sure
to fix thoroughly.
2. Attach the other end of the duct to adaptor B.
3. Put the end of duct to a nearby window.
Permanent
1. Attach one end of the duct to the exhaust air outlet of
the mobile air conditioner. According to the arrow di-
rection, push it downwards, be sure to fix thoroughly.
2. Install the adaptor A onto the wall by using 4 expan-
sion plugs and screws, be sure to fix thoroughly.
3. Attach the other end of the duct to adaptor A.
4. Cover the hole using the adaptor cap when not in
use.
The duct can be compressed or extended moderately
according to the installation requirement, but it is desirable
to keep the duct length to a minimum.