MM446 RAIDER
®
VACUUM CLEANER
9
User’s Manual
Important safety instructions
If the supply card is damaged, the manufacture or
its service agent or a similarly qualified person must
replace it in order to avoid a hazard for household
use only
Do not for absorbing detergent, kerosene, glass, ne-
edle, cigarette ash, water, match etc.
The appliance should not be exposed to heat.
Do not vacuum any moist or liquid substances. Ne-
ver immerse the appliance in water.
Unplug the appliance form the mains supply socket
after use and before every cleaning pull the mains
cable , in order to disconnect the appliance form the
mains.
Do not put any object into openings. Do not use with
any opening blocked keep the appliance free of dust,
lint hair etc.
Do not use the vacuum cleaner without dust conta-
iner of dust filter in place.
Do not vacuum any flour, cement etc in order to avo-
id the overloads.
The appliance should only be cleaned with a dry or
damp cloth, it should never immersed in water. Do
not use any solvents for cleaning.
Use
Make sure the dirt container and the filters are cor-
rectly in place.
Fit the hose in the vacuum opening. To loosen the
hose, simultaneously press the two plastic keys loca-
ted on each side.
Attach the correct accessory, necessary toclean the
chosen surface, to the handle.
Telescopic Tubes
The telescopic wand adds flexibility and control.
Depending on the situation, adjust the length of the te-
lescopic tube. Press and maintain the plastic switch and
lengthen or retract the telescopic tube accordingly.
Release the plastic switch and gently extract the tube
until it is in the correct position. The tube may be extended
up to a maximum length of 45cm.
Multi Brush ( Integrated in the nozzle ).
Specially indicated for curtains, upholstery and furnitu-
re. To use the brush, follow the instructions in
Upholstery Brush
Specially indicated for cleaning textile surfaces.
Accessory Holder
The integrated accessory holder may be placed on the
tube.
HEPA Filter Cleaning Brush
This specially designed brush facilitates cleansing the
integrated HEPA Filter. The brush is attached to the HEPA
motor filter to avoid misplacement.