MM334
7
Before first use
Install microSD card according to icon, plug device to USB port for a few
hours to charge internal battery. When charging is completed LED will be
off.
Power on/power off
Press once Power button to power on the device. Press and hold for 3 se-
conds to power off the device. Whenever DC input is plugged in device will
power on automatically, whenever DC input is plugged out device will po-
wer off automatically.
Switching modes
Press Mode button to switch mode in following cycle: [movie mode/still
capture/playback/file explorer]
Menu operating
When device is not recording press Menu button, three icons will appear:
context menu, general settings, language. Context menu depends on se-
lected mode: movie/still capture/playback/file explorer.
To enter option press OK button, to exit press Menu button again, to navi-
gate use Up/Down button.
Language
select OSD menu language.
General settings:
Beep
– sound of buttons [on/off]
Clock Settings
[enter current date and time]
Date format
TV system
– AV output mode [PAL/NTSC]
Flicker
– adjust accordingly to indoor lighting condition power supply
frequency [50Hz/60Hz]
Protect Level
– this function can lock file automatically when desired
shock level will occur (i.e. during car accident). Locked file will not be dele-
ted during cycle recording. Available options: [disable/0/1/2/3/4] where [0]
is for little force, [4] is for larger force.
GPS status
– check GPS signal
