USEr’S MANUAL
22
NICAM Function
Press [I/II] on the remote control when input source is
“TV”.
This operation do no effect to the channels without NICAM
signal.
Once [I/II] is pressed, it alternates in the different sound
options such as mono, stereo, dual I, dual II.
Selecting the OSD language
The factory setting of OSD (On Screen Display) language
is “English”. To edit the OSD.
1. Press [
MENU
], OSD menu appears.
2. Press [▼], until “Function” menu appears.
3. Press [►], to enter the setting menu, and “Language”
is high-lighted.
4. Press [◄/►], to set the language to your desired
language.
5. Press [
MENU
] to exit the submenu.
Mute function
Press [
MUTE
] on the remote control to switch off the
sound temporarily.
Press this button again (or [
+VOL
]), the sound comes
back.
Selecting the sound mode
Press [
S.STD
] repeatedly on the remote control to select
the desired sound mode.
OSD Menu setting
Navigating through menus
Press [
MENU
], OSD main menu appears.
Press [▼]. the main menu displays sequentially: PICTURE
→ SOUND → FUNCTION → TV → …
When some menu option is gray displayed, that means
the option is not available in current setting mode.
Common procedure of operation:
For each menu, press [▲,▼] on the remote con
-
trol to select the options of the main menu.
Press [◄,►,▲,▼] on the remote control to
change or confirm your settings. (Follow the tips
at the bottom of the related OSD screens.)
After setting of an option is finished, press
[MENU] to exit stage by stage, while press
[EXIT] to turn off OSD screen directly.
Main OSD
Picture Menu
Sound Menu
TV Menu