Manta BBX003, User Manual

Page: 23 / 61

23
Press the FUNC button [9] to cycle through all of the function modes. The current
function will be shown on the LCD screen [5].
To return the unit to Standby mode (OFF), press and hold the FUNC button [9].
Radio Function (FM, AM)
1. Press the FUNC button [9] to choose the radio band (FM, AM).
2. To tune to a station, press the

/+ [6] or

/– button [7] to skip up or down
the frequency range. Press and hold either button to quickly scan up or down
the frequency range. When a station is found the search will stop and lock
onto the station.
3. Press the VOL– [10] or VOL+ [11] buttons to adjust to the desired output
level.
You can store up to 20 preset radio stations per radio band.
1.
While listening to a tuned radio station, press and hold the MODE button [8]
to enter into storing mode. Press the

/+ [6] or

/– [7] button to tune
to a station.
2. When the station is selected, press the MODE button [8] once more to store
the current station to the preset memory.
3. To tune to a preset station, press the MODE button [8] and then press the

/+ [6] or

/– [7] buttons to browse the preset station (1-20).
TIPS FOR BEST RECEPTION
AM – The AM antenna is located inside the cabinet of the unit. If AM reception is
weak, change the position of the unit until the internal antenna picks up
the strongest signal.
FM – If a stereo broadcast program is being received, the FM STEREO INDCATOR
will light. During FM or FM Stereo reception, always keep the FM
Telescopic Antenna [3] fully extended for best performance. However, if
FM reception is weak, try repositioning the unit near an open window until
you get the best reception.
CD FUNCTION
NOTE: THIS UNIT NOT ONLY PLAYS COMMERCIAL COMPACT DISCS BUT ALSO
SELF-RECORDED CD-R/RW DISCS.
U
ser
’s Manual
EN