STEREO AMPLIFIER –
AV-500
13
Normal function
1 . Select audio source by press INPUT key on the con-
trol .
2 . Press VOL+/- keys on the remote control to adjust the
setting of main volume control to you listening level .
3 . Some audio sources or speakers, or incorrect speak-
er placing can cause unbalanced hearing .
4 . Press CH .MODE key on the remote control to select
channel mode . When select AC-3 input, it will be set on
5 .1 CH .
5 . Press LOUD key on the remote control to adjust the
channel sound .
6 . Press /- or BASS+/- keys on the remote
control to increase or decrease music treble or bass ef-
fect .
7 . Press DSP key on the remote control to select DSP
mode . Eight modes could be selected: POPS, JAZZ, DIS-
CO, STADIUM, MATRIX, CLASSIC, HALL, or DSP OFF .
8 . Press AUTO key, unit will automatically scan input sig-
nals . It will scan in the order of AUX, CD/VCD, DVD, AC-3
and USB . After detected one channel had signal input, it
will stop scanning and output the signals .
9 . Press MUTE key on the remote control to mute, press
it again to unmute . Or press any keys on the front panel to
unmute .
10 . Press STANDBY key on the remote control to make
it standby . Press it again the indicator will light down and
enter normal status .
AM/FM Tuner
Tuner application
1 . Before using radio function, you must connect the
supplied antenna . Adjust the antenna to obtain optimum
reception . Press INPUT key on the remote control, to se-
lect TUNER function .
2 . Press AM/FM keys on the remote control, to select
AM band or FM band .