LCD MONITOR WITH TV SET
®
1903
23
submenu , press OK key to enter TIMER submenu . you
can choose and adjust Start At, Power Off or Change CH
submenu. When you choose the Star At submenu ,after
pressing OK key on the telecontrol device ,press the up/
down key on the telecontrol device or the +/- key on the
front panel to adjust Star at. Press “left/right” key on the
telecontrol device or +/- panel to clear zero.
When you select Power off submenu ,after pressing OK
key on the telecontrol device ,press the left/right key on the
telecontrol device or the +/- key on the front panel select
disable or time ,after choosing time ,press up/down key on
the telecontrol device or front panel to adjust time which
you wish. When you select Change CH submenu, after
pressing OK key on the telecontrol device, press left/right
key on the telecontrol or +/- key on the front panel to cho-
ose disable or time, after choosing time ,press up/down
key on the telecontrol device or front panel to adjust time
which you wish. After pressing OK key on the telecontrol
device, you can adjust channel which you wish by pressing
up/down key on the telecontrol device.
AV Menu
Press ‘MENU‘ key on the front panel or the telecontrol
device to display the AV main menu.
Image
Pic Mode
Custom
Brightness
70
Contrast
65
Hue
0
Saturation
80
Back Light
100
Sharpness
3
Color Temperature
Cold
E
:
Select
"
:
Enter
Source
:
Return
OSD
1. Image The adjustment method is the same as TV.
2. Sound The adjustment method is the same as VGA.
3. OSD The adjustment method is the same as VGA.
4. Advanced Tools:
Press the ‘ up/down ‘ key on the front panel or telecontrol
device to choose Advanced Tools. Press the ‘ left/right ‘ key
on the telecontrol device or the ‘ +/- ‘ key on the front panel
and then press ‘up/down’ key on the front panel or telecon-
trol device to choose the Color Standards submenu.
After choosing Color Standards and pressing the ‘left/
right ‘ key on the telecontrol device or the ‘+/- ‘ key on the
front panel , you can choose following modes: SECAM
AUTO NTSC PAL.
Press the ‘up/down ‘ key on the front panel or telecon-
trol device to choose Advanced Tools. Press the ‘left/right
‘ key on the telecontrol device or the ‘ +/- ‘ key on the front
panel and then press ‘up/ down ‘ key on the front panel or
telecontrol device to choose ‘up/down ‘ key on the panel
or telecontrol device to choose Reset submenu. Press the
‘OK ‘ Key again on the telecontrol device to reset.
YCbCr Menu
Press the ‘MENU ‘ key on the front panel or the telecon-
trol device to display Y Cb Cr main menu.
Image
Pic Mode
Custom
Brightness
70
Contrast
65
Hue
0
Saturation
80
Back Light
100
Sharpness
3
Color Temperature
Cold
E
:
Select
"
:
Enter
Source
:
Return
OSD
1. Image: The adjustment method is the same as TV.
2. Sound: The adjustment method is the same as VGA.
3. OSD: The adjustment method is the same as VGA.
4. Advanced Tools: The adjustment method is the
same as VGA.