IMPORTANT INFORMATION
If the room where the fan is to be installed already contains a stove, water heater or a gas fire, it is
essential to ensure that the air supply to the room is enough for both the fan and the combustion
appliance.
Please check that the appliance has not been damaged in transit before installation.
Ensure the electrical specifications label corresponds to your electrical supply carefully.
WARNING:
FOR YOUR SAFTEY, ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A
LICENSED ELECTRICIAN.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions on the appliance concerning its use by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Fan must be installed at least 120cm above any hotplate and must have at least 50cm clearance
at the rear of the fan blades.
Minimum installation height is 2.1 meters from the floor to the bottom of the exhaust fan.
PARTS IDENTIFICATIONS
DIMENSION (mm)
Model
A
B
C
D
Fig. 1
Terminal
Fan body
Panel
Motor
Blade
Motor house cover
Quick fits
193X193
33
120
145
VUF150WH
IMPORTANT INFORMATION
If the room where the fan is to be installed already contains a stove, water heater or a gas fire, it is
essential to ensure that the air supply to the room is enough for both the fan and the combustion
appliance.
Please check that the appliance has not been damaged in transit before installation.
Ensure the electrical specifications label corresponds to your electrical supply carefully.
WARNING:
FOR YOUR SAFTEY, ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A
LICENSED ELECTRICIAN.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions on the appliance concerning its use by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Fan must be installed at least 120cm above any hotplate and must have at least 50cm clearance
at the rear of the fan blades.
Minimum installation height is 2.1 meters from the floor to the bottom of the exhaust fan.
PARTS IDENTIFICATIONS
DIMENSION (mm)
Model
A
B
C
D
Fig. 1
Terminal
Fan body
Panel
Motor
Blade
Motor house cover
Quick fits
193X193
33
120
145
VUF150WH
MODEL
A
B
C
D
MRUF100
150mm
34mm
83mm
94mm
MRUF125
170mm
32mm
108mm
116mm
MRUF150
193mm
33mm
120mm
145mm
A
A
B
C
D
WIRING DIAGRAM
Terminal
block
Supply cable
entry
M
N
L
L
N
IMPORTANT CONSIDERATIONS BEFORE INSTALLING
1.Adhere to the latest national wiring rules AS/NZS 3000, for wiring and when installing in
bathrooms, nearby sinks and water taps.
2.For the exhaust fan to work efficiently, replacement of air volume equivalent to what is being
extracted must be able to enter the room. In general this air would be drawn under the door, or
through a slightly opened window. If the room is air tight, the fan will function poorly.
Fig. 2
Fig. 3
MRUF100WH - Ø100mm
MRUF125WH - Ø120mm
MRUF150WH - Ø150mm
CUT-OUT
