Manrose intellivent 2.0, User Manual

Page: 6 / 22

Cable entries
A=surface
B=concealed
3 Wiring
• All electrical work must be carried out by a registered
electrician.
• The fan is double insulated and must not be earthed.
• The fan is fitted with a multi-pole switch and does not
require a pre-wired external switch.
1 Push the multi-pole switch up to position 0 – OFF.
2 The cable can be installed either along the surface using
entries A in the chassis or concealed using the B inlets
in the chassis. Both options are shown below. Use the
insulating sleeve supplied for the cable.
3 If you use any of the B inlets, remove the concealed
round plastic cover by tapping inside the break-off
notch from the inside out to the back with a screwdriver,
for example.
A
A
A
A
B
B
B
B
ON
OFF
6