▶
Always wear safety goggles or safety glasses with side shields. Use a dust mask for dusty operations, and wear
hearing protection if
you’ll be using the tool for an extended period of time.
▶
Dress right, and remember that looks
don’t count. No loose-fitting clothing, no neckties, no jewelry, no dangling
objects of any kind. Long hair must be tied back out of your way. Non-slip footwear is recommended.
▶
Never use power tools if you are tired, sick, distracted, or under the influence of drugs or alcohol.
▶
Make sure your work area is neat and clean and free of any debris that might get in your way or be ignited
▶
Before you work, make sure appropriate, secure work with a clamp or vise to keep it from slipping.
▶
Before you plug in any power tool, make sure the power switch is off.
▶
Be sure all appropriate guards are in place and working.
▶
Always turn off and unplug the tool before you make any adjustments or change accessories.
▶
Never use any accessory except those specifically supplied or recommended by the manufacturer.
▶
Never use power tools in wet or damp conditions.
▶
Never use a tool that is damaged or malfunctioning in any way.
▶
Make sure cutters are clean, sharp and securely in place. Never use bent, broken, or warped cutters.
▶
Never rush what you are doing. Always pay close attention.
Don’t let anything distract you. Think ahead.
▶
When using hand-held power tools, always keep a firm grip with both hands. Losing control creates a hazardous
situation.
▶
Always use the right tool for the right job. No substitutions allowed.
▶
Always unplug, clean and store the tool in a safe, dry place.
▶
Make sure that the cutter blade or the belt is not in direct contact with the user. Contact may lead to serious
injury.
▶
Please be aware that the cutter can generate rebound force (quick back) due to its rotation direction.
6. Safety instruction
Use of Belt sander is recommended by someone at least 18 years old or older with the experience of using
grinder in woodcraft or woodcarving industry.
Also, always follow the safety precautions during use. If you never used a grinder, we recommend that you
receive instructions and safety training from someone that can handle grinder proficiently.
a. Before supplying power, ensure that the on/off switch is in the OFF position and check if bolts in each part are
securely fixed, and the belt safety cover and handles are installed properly. Hold the handle on the body with the
left hand, hold the grinder with the right hand, and supply power while holding it safely with both hands.
b. When the power is turned on, the power is delivered from drive roller to vertical gear where the sand paper is
rotating. After it starts to operate, check if sand paper delivers power properly, and begin sanding by getting the
paper close to the surface of wood.
c. Check for any debris likes pebbles or sand on wood and remove during work. Also, be careful with kickback.
d. During operation, if the tool is forcibly used, the sand paper may be worn easily. Work safely by giving enough
time for the tool to sand the wood.
e. When done with work or pausing, turn the power off and hold the grinder with both hands until the residual
rotation finishes. Put it down when it completely stops.
f. Always unplug when not working.
WARNING : Read the product guide provided with the product, and follow all precautions. Please do not
discard the product guide but keep it.
READ ALL INSTRUCTIONS
