9
Specifications
Size ....................................... Controller, including Pump Housing: W 12.5 in. (31.75 cm)
×
H 7.00 in. (17.78 cm)
×
D 10 in. (25.4 cm)
Weight (dry) ........................... 10 lbs (4.54 kg). Weight includes battery.
Environmental Protection ....... NEMA 4X/NEMA 6 structural resin housing around electromechanical components
Sampler Pump ....................... ¼-inch peristaltic 12 VDC pump with impact and corrosion-resistant plastic pump body, and dual-roller
mechanism
Maximum Lift ......................... 28 ft (8.5 m)
Transport Velocity .................. 927 ml per minute @ 10 ft. head height
Power Requirement ............... 12VDC 8-Amp hour battery
Warranty: ............................... One year from date of shipment.
Accessories
MSP250 Manual Sampling Pump* Spare Parts/Accessories
•
Replacement Pump Tubing
¼-inch Pharmed (pre-cut 18-inch length) P/N 889924
¼-inch Pharmed (bulk by the foot) P/N 566927
•
Replacement
Battery
Standard 8-Amp hour battery P/N 690539
•
Battery Charger
Standard-output 3-stage Charger (12 VDC @ 750 mA; for 110/220
VAC operation) P/N 885400*
•
Hose Couplings
Female P/N 552113
Male P/N 5521112
•
Intake Hose
¼-inch bulk clear intake hose P/N 566926
Please specify required length in feet.
•
Sample Containers
One 2.5-gallon polyethylene bottle w/cap P/N 687547
One 4-gallon polyethylene bottle w/cap P/N 687551
One 5-gallon polyethylene bottle w/cap P/N 687535
One 2.5-gallon glass bottle w/Teflon lid liner P/N 889715
5-gallon polyethylene pail with splashguard & transport lid
P/N 889721
•
Strainers
¼-inch PVC P/N 889146
¼-inch stainless steel P/N 579595
* Basic sampler includes one (1) 8-amp hour battery, one (1) standard-output battery charger, one (1) 18” pre-cut length of pump tubing with
a set of male and female hose couplings attached, and one (1) additional set of hose couplings (male & female). Bottle, intake hose, and
strainer are additional.
Engineering
Specification
1. The controller enclosure is made of
structural resin with NEMA 4X/NEMA 6
ratings.
2.
All wetted parts have a minimum internal
diameter of ¼-inch, and are stainless steel
or PVC (optional strainer), PVC (sampling
hose), and Pharmed (pump tubing).
3. The sampler incorporates a 3-roller ¼-inch ID
peristaltic pump
4.
The sample liquid must be under forced flow at
all times and shall not pass through a metering
chamber, distribution plate, or valves. .
5.
The sampler is capable of a transport velocity
of 927 ml per minute @ 10 ft. head height.
6. The sampler has an optional weighted
strainer of PVC or stainless steel.
7. Sampler is suitable for 110 or 220V
operation with standard battery
charger.
8. This sampler is a Manning ¼-inch
MSP250 Manual Sampling Pump.
MSP250 Manual Sampler 04/24/2012
For parts and service, please contact: Manning Environmental Tech Support (800) 863-9337 x 205
or email
Headquarters and Sales:
Manning Environmental, Inc
.
101 Bar T Drive
Florence, Texas 76527-4445
Phone
:
(
800) 863-9337
Fax
: (254) 793-9965
Web:
http://www.manningenvironmental.com
In the interest of improving and updating its equipment, Manning reserves the right to alter specifications for equipment at any time.
Summary of Contents for MSP250
Page 2: ......
