MANN LAKE Rite-Cell FN-710 Quick Manual Download

Page: 2 / 4

Step One:

Take foundation and insert it into the bottom

groove of the frame, as seen in the picture above.

You Will Need:

• Assembled Frame

• Rite-Cell

Foundation

Step Two:

Bow the foundation out so you can get it to

snap into the top of the frame.

Step Three:

Move your hand down the foundation to snap it

into the top bar.

Completed Frame with Rite-Cell

Foun-

dation.

Bottom Groove

→

Bow Out

→

Snap Into Top Bar

→

IF YOU HAVE ANY QUESTIONS, FEEL FREE TO CONTACT THE MANN LAKE LOCATION NEAREST YOU

Completed Frame

You Are Now Ready For Foundation

Summary of Contents for Rite-Cell FN-710

Page 1: ...e bottom bar As Shown In Diagram C and D Diagram A is a picture of the top bar Diagram B is a picture of the top bar and the end bar and how they fit together Diagram C is a picture of the bottom bar...

Page 2: ...n Foundation Step Two Bow the foundation out so you can get it to snap into the top of the frame Step Three Move your hand down the foundation to snap it into the top bar Completed Frame with Rite Cel...

Page 3: ...the foundation into the void left by the wedge at the top of the frame Step Three Replace wedge at the top of the frame and nail it in Insert Into Top Of The Frame Insert Into The Bottom Of The Frame...

Page 4: ...spool then cut off any excess wire so it is short around the nail Cut Wire Step Six Pound the nail into the frame Step Four Wrap the loose end around the nail in the end bar Tighten the wire by turni...