22 – EN
EN – 23
EN
7.5 Selecting the fan level
Menu Button
Action
Settings
Air flow rate
Set the air flow rate in the appropriate menu by
moving the slider to the desired position.
The following setpoint settings for air flow are
assigned to the stages of the slider:
Controller Stage Air flow rate
1
250 m³/h
2
500 m³/h
3
750 m³/h
4
1000 m³/h
5
1250 m³/h
6
1500 m³/h
7
1750 m³/h
8
2000 m³/h
9
2250 m³/h
10
2500 m³/h
Menu Button
Action
Settings
UV
In automatic mode, the UV-C lamps for disinfecting
the HEPA filter element are switched on and off at
regular intervals each day.
You also have the option of starting the UV-C lamps
manually with the “UV” button. The button then
appears in green.
Tap again to turn the lamps off.
The UV-C irradiation is active for 30 minutes after
switching on and then switches off automatically.
Menu Button
Action
Settings
Time Switch
The “Time switch” button takes you to the menu for
programming the timer.
Switch function
Activate the automatic mode by tapping the
“Switch function” button.
– The button then appears in green.
Weekday
In the list of weekdays, activate the buttons for the
days on which the appliance should switch itself
on and off automatically.
The timer is activated on days with a green button.
The timer is deactivated on days with a red button.
Manual operation is still possible on these days.
Operation
Operation
0
2500
1250 m
3
/h
7.6 Manually switching the UV-C lamp on*
NOTE
The recommendation is to use the UV-C lamps for no more than 30 minutes a day.
Longer running times can shorten the service life of the HEPA filter.
7.7 Automatic and manual mode
The appliance is suitable for manual and automatic operation (timer).
In automatic mode, you can store the operating times for certain days of the week.
As long as the automatic mode is active, the UV-C lamps* are switched on and off
automatically at regular intervals.
NOTE
For the best possible air purification, we recommend that you operate the
appliance in automatic mode.
7.7.1 Manual mode
Proceed as follows to use the appliance in manual mode:
9. Switch the appliance on (see section 7.4 on page 21).
10. Set the fan level (see section 7.5 on page 22).
11. Switch the UV-C lamps* on at regular intervals (see section 7.6 on page 22).
7.7.2 Automatic mode (timer)
CAUTION!
It is not possible to use an external timer to control the power supply of the
appliance for scheduled air purification—this can damage the appliance!
Always use the automatic mode provided by the appliance!
NOTE
In order for the time switch to work, please ensure that the date and time are set
correctly in the appliance (see section 7.8.2 on page 25)
* Applies to models with integrated UV lamps
* Applies to models with integrated UV lamps
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
