FRONT PANEL
IN
BYPASS
HIGH FREQ. CUT
SECTION
LOW FREQUENCY
SECTION
BOOST SELECT CUT
BANDWIDTH SELECT BOOST
SELECT CUT
POWER
HIGH FREQUENCY BOOST
SECTION
A B C D E F G H I J K
A
IN / BYPASS - This switch in BYPASS mode bypasses the EQ section while the amplifier
remains in circuit.
B
L.F. BOOST - Provides continuously variable BOOST from 0dB to +12dB to the low
frequency selected by control C. This is not symetrical with the CUT control so that
combinations of boost and cut do not simply cancel each other but give a different sound
unobtainable with other EQs.
C
LOW FREQUENCY SELECTOR - Determines frequency at which maximum L.F. BOOST
or CUT occurs.
D
L.F. CUT - Provides continuously variable CUT from 0dB to -15dB to the low frequency
selected by control C.
E
BANDWIDTH - This continuously variable control affects the width of the HIGH
FREQUENCY BOOST curves. Use minimum setting for a smaller range or area of high
frequencies affected by the H.F. BOOST control or maximum setting for a larger, broader
range of frequencies affected by the H.F. BOOST control. Similar to "Q" in parametric EQs.
F
H.F. BOOST - Provides Continuously varaible BOOST from 0 to +17dB to the high
frequency selected by control G.
G
HIGH FREQUENCY BOOST SELECT - Selects at which frequency maximum operation of
the H.F. BOOST section occurs. The frequencies are marked in KiloHertz.
H
HIGH FREQUENCY CUT - Provides continuously variable CUT from 0 to -15dB starting
(-3 dB) at the frequency chosen by control I. This is a shelf EQ rather than a low pass filter so
that the user has control of the depth and frequency.
I
HIGH FREQUENCY CUT SELECT - Selects at which frequency the H.F. CUT control
occurs.
J
LED - Illuminates when the power is on.
K
POWER ON / OFF - This switch engages UP turns the power ON; engaged DOWN
switches the power OFF.
7
