background image

To  reduce  the  risk  of  electric  shock,  do  not  dismantle  the  product  and  do  not  expose  the 
apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified 
personnel only. 
 

Explanation of Graphical Symbols: 
The lightning flash within an equilateral triangle is intended to alert you to 
the  presence  of  un-insulated  dangerous  voltage  within  the  product's 
enclosure  that  may  be  of  sufficient  magnitude  to  constitute  an  electric 
shock to a person or persons. 

 

The exclamation point within an equilateral triangle is intended to alert you 
to  the  presence  of  important  operating  and  maintenance  (servicing) 
instructions in the literature accompanying the product. 
 
To  achieve  the  utmost  in  enjoyment  and  performance,  and  in  order  to 

become  familiar  with  its  features,  please  read  this  manual  carefully  before  attempting  to 
operate  this  product.  This  will  assure  you  years  of  trouble  free  performance  and listening 
pleasure. 
 
Important Notes 
This safety and operating instruction should be retained for future reference. 
The  apparatus  should  not  be  exposed  to  dripping  or  splashing  or  placed  in  a  humid 
atmosphere such as a bathroom. 
Do not install the product in the following areas: 
Places exposed to direct sunlight or close to radiators. 
On top of other stereo equipment that radiate too much heat. 
Blocking ventilation or in a dusty area. 
Areas where there is constant vibration. 
Humid or moist places. 
Do not place near candles or other naked flames. 
Operate the product only as instructed in this manual. 
Before  turning  on  the  power  for  the  first  time,  make  sure  the  power  adaptor  is  properly 
connected. 
For safety reasons, do not remove any covers or attempt to gain access to the inside of the 
product. Refer any servicing to qualified personnel. 
Do  not  attempt  to  remove  any  screws,  or  open  the  casing  of  the  unit;  there  are  no  user 
serviceable parts inside. Refer all servicing to qualified service personnel. 

 

FCC STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 

(1)  this device may not cause harmful interference.   

(2)  this device must accept any interference received, including interference that may 

cause undesired operation. 

Summary of Contents for MW-1587















Reviews: