English
5
English
6
10
MW-1265
Press the MODE button repeatedly, until the power on indicator
changed to blue to enter the Bluetooth mode.The blue color
indicator flashes to show that the unit is in pariring mode.
Press the MODE button repeatedly until the power on indicator
changed to Purple to enter the USB mode.
If your device asks for a passkey (depending on the
device manufacturers, model, and software version),
then enter digits
“
0000
”
(four zeros) and press OK.
If pairing has been carried out successfully, the Blue colour indicator
stops flashing.
also
during any modes other than USB mode.
Connect 3.5 mm stereo audio cable (included) to an
external audio source. If required, use a suitable
adapter (not included).
Press the MODE button repeatedly until the power on indicator
changed to cyan to enter the AUX mode.
the unit: hardwired, wireless via Bluetooth,iPod(iPhone/iPad)
via the iPod dock, or via the USB port.
Insert
the
power
plug
into
a
convenient
Ac
wall
outlet
Insert 1pc
CR2032
button
type
battery
.
Pay
attention
to
the correct polarity (see bottom of battery compartment)!
battery. For proper
How to change the play mode
Press the MODE Button during power on, the play mode
will be changed cyclically from Bluetooth mode to iPad/
iPhone/iPod playback mode, USB mode, and then to AUX-IN
mode, meanwhile, the Power on indicator light color will
be changed from Flashing Blue (Bluetooth mode),Orange
(iPad / iPhone / iPod playback mode) , Purple (USB
mode), and then to cyan (AUX mode)
By pressing & hold the
“
>/<
”
buttons on the unit or
pressing the VOL+/VOL- buttons on the remote control
you can adjust the desired volume.
standby (by pressing and hold the button) and operating
mode. In standby, the Power on Indicator lights red.
Keep the button on the remote control pressed to toggle
the unit between standby and operating mode.