4. MUTE : Mute or resume the sound.
Note: When Mute is on, the LED will switches
slowly.
5.MOVIE : Press to choose Movie surround sound
effect. Press again to choose Music sound effect
6.
▲
: Press to adjust volume level up.
7.
: In Bluetooth/USB mode, skip to previous
track.
8.
: In Bluetooth/USB mode, skip to next track.
9. : In Bluetooth/USB mode, start or pause
playback.
-If the speaker is already connected and you
would like to connect to a different device, press
and hold for 3 seconds to break the current
connection and initiate pairing.
10. : Press to adjust volume level down.
11. BASS+ : In Music sound effect , press to adjust
bass level up.
12. BASS- : In Music sound effect , press to adjust bass level down.
13. TRE+ : In Music sound effect , press to adjust treble level up
14. TRE- : In Music sound effect , press to adjust treble level down
PREPARATIONS
Prepare The Remote Control
The provided remote control allows the unit to be operated from a distance.
• Even if the Remote Control is operated within the effective range (up to 6m), remote
control operation may be impossible if there are any obstacles between the unit and the
remote control.
• If the Remote Control is operated near other products which generate infrared rays, or if
other remote control devices using infra-red rays are
used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.
Remove the protective tab for first-time use or
replace the battery of remote control
The Remote Control has a pre-installed lithium CR2032
battery. Remove the protective tab to activate the
remote control battery.
Use a screwdriver to remove the screw(A)
Remove the battery compartment cover(B)
Remove the protective tab from the battery.
Place the battery into the foreseen area.
Make sure that the side marked with + is facing up, as
shown in the illustration.
