background image

General Information

Section 1

1-4

 Part Number 80-1633-3

Owner Warranty Registration Card

GENERAL

The packet containing this manual also includes 
warranty information. Warranty coverage begins the day 
your new ice machine is installed.

If you do not return your OWNER WARRANTY 
REGISTRATION CARD, Manitowoc will use the date of 
sale to the Manitowoc Distributor as the first day of 
warranty coverage for your new ice machine.

Warranty Coverage

GENERAL

The following Warranty outline is provided for your 
convenience. For a detailed explanation, read the 
warranty bond shipped with each product.

Contact your local Manitowoc Distributor, Manitowoc Ice, 
Inc. or visit our website at www.manitowocice.com if you 
need further warranty information.

PARTS

1. Manitowoc warrants the ice machine against defects 

in materials and workmanship, under normal use 
and service for three (3) years from the date of 
original installation.

2. The evaporator and compressor are covered by an 

additional two (2) year (five years total) warranty 
beginning on the date of the original installation.

LABOR

1. Labor required to repair or replace defective 

components is covered for three (3) years from the 
date of original installation.

2. The evaporator is covered by an additional two (2) 

year (five years total) labor warranty beginning on 
the date of the original installation.

EXCLUSIONS

The following items are 

not

 included in the ice machine’s 

warranty coverage:

1.

Normal maintenance

adjustments

 and 

cleaning

.

2. Repairs due to 

unauthorized modification

s to the 

ice machine or 

use of non-standard parts

 without 

prior written approval from Manitowoc Ice, Inc.

3. Damage caused by 

improper installation

 of the ice 

machine, electrical supply, water supply or drainage, 
or damage caused by floods, storms, or other acts of 
God.

4.

Premium labor rates

 due to holidays, 

overtime

etc.; travel time; flat rate service call charges; 
mileage and miscellaneous tools and material 
charges not listed on the payment schedule. 
Additional labor charges 

resulting from the 

inaccessibility of equipment

 are also excluded.

5. Parts or assemblies subjected to 

misuse, abuse, 

neglect or accidents

.

6.

Damage or problems

 caused by installation, 

cleaning and/or maintenance p

rocedures 

inconsistent with the technical instructions 
provided in this manual.

7.

This product is intended exclusively for 
commercial application.

 No warranty is extended 

for personal, family, or household purposes.

AUTHORIZED WARRANTY SERVICE

To comply with the provisions of the warranty, 

refrigeration service company qualified and 
authorized by a Manitowoc distributor, or a 
Contracted Service Representative must perform the 
warranty repair.

NOTE: If the dealer you purchased the ice machine from 
is not authorized to perform warranty service, contact 
your Manitowoc distributor or Manitowoc Ice, Inc. for the 
name of the nearest authorized service representative.

Service Calls

Normal maintenance, adjustments and cleaning as 
outlined in this manual are not covered by the 
warranty.

 If you have followed the procedures listed on 

page 5-1 of this manual, and the ice machine still does 
not perform properly, call your authorized service 
company.

Important

Complete and mail the OWNER WARRANTY
REGISTARATION CARD as soon as possible to
validate the installation date.

Important

This product is intended exclusively for commercial
application. No warranty is extended for personal,
family, or household purposes.

Summary of Contents for S1800M







































Reviews: