background image

   7601193 (F-STYLE OR NON-MANITOWOC BIN) 

                           

           7601223 (S-STYLE MANITOWOC BIN) 

                               Q-DUAL WATER TROUGH/CURTAIN REPLACEMENT 

                                                                        Installation Instructions 

Kit Contents: 
 Water 

Trough 

 

.625 Hole Plug, White 

 

10-32 x 3/4 Phil Fat Type F Screw (2) 

 

10-24 x 1/2 Trim HWH TY23 (2) 

 

Trough Protector (2) 

 

Water Curtain (2) 

 

Ice Deflector Weldment 

 

Water Fitting Bracket 

 Control 

Board 

 Installation 

Instructions 

 Bushing 
 
Remove:  

1.

 

Splash shield (reuse) 

2.

 

Water inlet fitting and bracket (reuse fitting - discard bracket) 

3.

 

Water pump (reuse) 

4.

 

Water curtains (discard) 

5.

 

Trough protectors (discard) 

6.

 

Water level probe (reuse) 

7.

 

Water trough (discard) 

8.

 

Ice deflector (discard) 

9.

 

Control board (discard) 
 

Before you install: 

1.

 

Remove four screws from the water pump mounting bracket.  Remove three screws connecting the water pump 
housing to the pump motor.  Rotate the pump housing clockwise (from the shaft end) one position and then 
reinstall the screws and mounting bracket (see Figure 3). 

2.

 

Remove the water inlet fitting from the water inlet bracket.  Save two of the three plastic wing nuts and water inlet 
fitting.  These will be reused.  Discard the bracket. 
 

Install in the following order: 

1.

 

New ice deflector 

2.

 

New water trough 

3.

 

Water pump and reroute water pump supply hose and dump to right side of pump (see Figures 1 and 3) 

4.

 

Plug for water level probe and old mounting screw to cover holes - 

Note!  Do not install probe at this time

 

5.

 

New water curtains 

6.

 

New water inlet/water level probe mounting bracket, using screws provided (see Figure 2) 

7.

 

Water inlet fitting and water level probe using existing plastic wing nuts - route water inlet probe through 
grommet in bulkhead with ice thickness probe wire 

8.

 

1-1/2" bushing in water inlet bracket 

9.

 

Water inlet hose through bushing on back of bracket to water inlet fitting 

10.

 

New control board 

11.

 

Trough protectors 

 

Manitowoc Ice, Inc.                                                                                                                                                            

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                8006823 
Telephone 920-682-0161, Fax - Sales:  920-683-7589, Service/Parts: 920-683-7585,  Other:  920-683-7879                                    Sheet 1 of 3     
Web Site - www.manitowocice.com                                                                                                                                                           03/25/02 

 

Reviews: