6.3.3 Replacing the halogen lamp for the oven light
For your safety when performing servicing work
Before starting servicing work, it is essential that you familiarize yourself with the rules and hazard
warnings specified in 'Safe working when servicing the appliance' on page 133, and follow the instruc‐
tions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
59
■
Inserting and removing racks
82
■
Taking food in and out using the transport trolley (does not apply to ConvoSmoke)
73
Spare parts contents
Spare part required as listed in the spare parts list:
■
1 halogen lamp 12V
Materials required
You will need the following materials:
■
Socket wrench, size 8
Handling the halogen lamp
Always wear clean gloves or use a cloth to handle the working halogen lamp. Never touch the glass
bulb of new or reusable halogen lamps with bare fingers.
If it is not possible to remove the halogen lamp intact e.g. the contact pins are left behind, contact a
service engineer immediately.
Requirements
Check that the following requirements have been met:
■
The combi steamer has been disconnected from the power supply and protective measures taken
to ensure the power cannot be switched on again.
■
The cooking chamber has cooled down to a temperature of < 60 °C after its last use.
■
For appliances with a rack: the right-hand rack has been hinged into the cooking chamber.
■
For appliances with mobile shelf rack / plate rack (does not apply to ConvoSmoke): The mobile
shelf rack / plate rack and the roll-in frame have been removed from the cooking chamber.
■
The halogen lamp has cooled down.
■
The new halogen lamp has been checked for damage and is intact.
6 Servicing procedures
User manual
136
