Manitowoc CD25, Service Manual, Page: 3 / 286

SERVICE MANUAL
This Manual has been prepared for and is considered part of -
CD25
Crane Model Number
This Manual is Divided into the following Sections:
SECTION 1 INTRODUCTION
SECTION 2 SAFETY PRACTICES
SECTION 3 ELECTRIC SYSTEM
SECTION 4 HYDRAULIC SYSTEM
SECTION 5 PREVENTATIVE MAINTENANCE
SECTION 6 ENGINE AND ENGINE SYSTEMS
SECTION 7 TRANSMISSION AND TORQUE CONVERTER
SECTION 8 AXLES/DRIVE SHAFTS/WHEELS AND TIRES
SECTION 9 BRAKE SYSTEM
SECTION 10 STEERING SYSTEM
SECTION 11 STRUCTURALS
SECTION 12 SCHEMATICS/WIRING DIAGRAMS
NOTICE
The crane serial number is the only method your distributor or the factory
has of providing you with correct parts and service information.
The crane serial number is identified on the builder’s decal attached to the
operator’s cab.
Always furnish crane serial number when ordering
parts or communicating service problems with your distributor or the
factory.
An untrained operator subjects himself and others to death or
serious injury. Do not operate this crane unless:
• You are trained in the safe operation of this crane.
Manitowoc is not
responsible for qualifying personnel.
• You read, understand, and follow the safety and operating
recommendations contained in the crane manufacturer’s manuals and
load charts, your employer’s work rules, and applicable government
regulations.
• You are sure that all safety signs, guards, and other safety features are
in place and in proper condition.
• The Operator Manual and Load Chart are in the holder provided on
crane.
DANGER
!
© 2017 Manitowoc
1
4
5
6
7
8
2
3
9
10
Published 5-25-2017, Control# 587-01
Reference Only