manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 377

6.7.4.15 

Removing the fly boom extension

Danger of falling.
–

Do not climb onto the boom or the attachments.

–

Do not climb onto equipment parts (for example, boom

sections, ballast parts) hanging from a crane.

–

Use secure climbing equipment when bolting the attach-

ments.

–

Depending on the work height, use a ladder in accordance

with the applicable standards and regulations.

Disassembly

The machine is disassembled in reverse assembly order. Detailed

information on assembly can be found in the corresponding chap-

ters.

6.7.4.16 

Disassembling the fly boom

Disassembly

The machine is disassembled in reverse assembly order. Detailed

information on assembly can be found in the corresponding chap-

ters.

6.7.5  Setting up the auxiliary jib

6.7.5.1  Mounting the auxiliary jib.................................... 377
6.7.5.2  Establishing a power supply for the lifting limit

switch on the auxiliary jib.................................... 381

6.7.5.3  Reeving the hoist rope........................................ 381
6.7.5.4  Dismounting the auxiliary jib............................... 382

6.7.5.1 

Mounting the auxiliary jib

Danger of falling.
–

Do not climb onto the boom or the attachments.

–

Do not climb onto equipment parts (for example, boom

sections, ballast parts) hanging from a crane.

–

Use secure climbing equipment when bolting the attach-

ments.

–

Depending on the work height, use a ladder in accordance

with the applicable standards and regulations.

No other crane actions may be carried out while setting up. We

recommend exiting the cabin after setting the operating mode.

n

Machine operator

n

Slinger

L

 WARNING

L

 WARNING

Personnel

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

377

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands