5.2 Pre-Operation Check List
Check these items:
Frequency
Verify that mulcher is properly
attached to skidsteer.
Each operation.
Verify that hydraulic hoses
are connected to skidsteer
hydraulic couplers.
Each operation.
Check for entangled material
on rotor.
Each operation.
Verify all guards, doors and
covers are installed and
secured.
Each operation.
Verify cutting teeth on the
rotor are tight.
Every 4 hours.
Check belt chamber.
Every 4 hours.
5. Operation
5.1 Preparation For Use
^
WARNING
Drilling, sawing, sanding or machining
wood products can expose you to wood
dust, a substance known to the State of
California to cause cancer.
Avoid inhaling wood dust or use a dust
mask or other safeguards for personal
protection.
For more information go to www.
P65Warnings.ca.gov/wood.
^
WARNING
Wear an approved dust mask or respirator.
Follow local, state and federal regulations.
Although the brush mulcher has been carefully inspected
and checked prior to shipment from manufacturer, it is
recommended that the unit be thoroughly inspected.
Check all bolts for tightness and remove all shipping
tags, bags, skids, and blocking.
Review and understand this manual and operating unit
manual.
Remove any masking materials affixed during painting.
Inspect the mulcher and any accessory equipment to
verify that nameplates and all safety warning, caution
signs and decals provided with the equipment are in
place and clearly visible.
Visually inspect the unit before each start up. Check
for loose or missing parts and any damage that may
have occurred during moving or shipping.
Review all skidsteer pre-start instructions, and be sure
that all recommended steps and procedures have
been followed.
Note:
Always keep the weight of the machine in mind.
Never position body in line of impact
.
10
Attachments.Manitou-Group.com
