channel and the white cable carries the left audio channel. You might need to experiment
to find out which is which when using a third party cable.
Please check the length of the 3.5mm 4-pole Minijack plug (see below). The correct size
of the plug is 14mm. Connecting with an incorrect plug size, for example with the 17mm
type, will not work and may damage the AV socket of your Manhattan box.
Why does loop out (also known as loop through) not work in standby?
As explained on page 12 of the Get Started Guide, in order to meet EU energy regulations, it is
disabled in standby in order to conserve energy. It can be turned on in the System section of the
Settings menu. Press MENU and go to: Settings > System > Loop Out in Standby.
Why is the screen blank and I can't hear anything?
There are a few possible reasons.
Your T1 is not connected properly
Ensure your aerial is connected to your T1 and an HDMI or AV cable is connected from your
T1 to your TV.
When your T1 is turned on, the LED on the front is blue.
The correct input on your TV is not selected
Press the GUIDE button on your remote control. This displays the TV Guide, making it easy to
tell when you find the right input.
To change inputs, most TV remotes use a button labelled ‘AV’, ‘SOURCE’, ‘INPUT’, or with a
TV icon and arrow. Each press should cycle through your inputs. Check your TV's manual if
necessary.
Once you find the input displaying the TV Guide, press EXIT and check if live TV is working.
Try changing to BBC 1 by pressing '1' on the remote control. If the T1 says there is No Signal,
you may have a problem with your aerial. To retune:
