OperatiOn
ID Setup
With the mouse positioned near the receiver,
use a hard, narrow object (such as a pin or a
paper clip) to press both ID buttons: first on
the receiver; then, within 10 seconds, on the
underside of the mouse. Hold each
button in for a full second. The
receiver light will flash rapidly for
a few seconds, then remain lit,
indicating that the connection
between the receiver and the
mouse has been made and the
mouse is ready for wireless operation.
Battery Charging
While using the mouse, if the red Low Battery
LED flashes, re-charge or change the
batteries. To re-charge, connect the
mouse to the computer with a USB cable.
The mouse can be used while the batteries
charge; a full charge requires 8-10 hours.
To stop charging, unplug the cable.
NOTE:
The actual charging time
depends on the degree of the discharge.
Functions
The function buttons
are indicated at right.
Mouse
ID button
Receiver ID button
Charger
connection
Home page
Page back
Scroll wheel
Left click
Page forward
Right click
Select application
My Computer
