.
USB 2.0 Windows 98SE Installation:
Place the installation CD in the CD-ROM and connect the
external enclosure to your computer. Auto Detect will run the Add New Hardware wizard, which
searches for new drivers for the USB 2.0 external enclosure. Click "Next."
Select "Search for the best driver for your device (recommended)"; click "Next."
Select "Specify location"; browse to "CD-ROM E:\USB 2.0-98 Driver"; click "Next." With the prompt
"Windows driver file search for the device Hi-Speed USB-to-IDE Bridge Controller," click "Next" to get
the prompt "Windows has finished installing the software that your new hardware device requires."
Click "Finish." Installation is complete; just restart your computer.
NOTE:
For Windows Me/2000/XP/
Vista, the driver’s already installed. Windows XP needs to be updated with SP2.
IEEE 1394 Installation:
The IEEE 1394 interface is Plug and Play, so no driver setup is needed.
4. Insert your
drive back
into the
enclosure.
5. Attach the
back cover.
3. Connect the
40-pin IDE,
audio & power
cables to your
drive; attach to
the panel with 4
screws.
2. Remove the front cover; insert
your drive.
1. Remove the front panel
from the enclosure.
