4. Insert a battery in the remote control.
5. Connect the included external infrared receiver and place it wherever
it will receive an unobstructed signal from the remote control.
Operation Tips
• Always connect and remove cables gently to prevent damage.
• If using HDMI cable longer than 5 m (approx. 16 ft.), use a power
adapter (not included) and connect the switch to an A/C outlet.
• If the switch’s Power LED doesn’t light, check that the switch is on.
• If there is no video display:
- check that the display unit is turned on;
- confirm that all cables are properly connected.
• If there is no audio:
- check the display device volume;
- turn off, then turn back on the HDMI source(s) and the HDMI Switch.
• If the remote control doesn’t work, make sure the remote signal is
reaching the external receiver, or replace the battery.
• If a DVI device doesn’t work, make sure that it’s HDCP-compliant.
specIfIcatIons
3
3
Standards & Certifications
• HDMI 1.3b, HDCP 1.0 / 1.1,
DVI 1.0, CE, FCC, UL
Connections
• (1) HDMI female (output)
• (3) HDMI female (intput)
• Power: 5 V DC / 2 A (adapter not
included)
• IR receiver: 3.5 mm stereo plug
Signal Input/Output
• Input video signal: 0.5 – 1.0 V p-p
• Input DDC signal: 5 V p-p (TTL)
• Max. single-link range: 2.5 Gbps,
1920 x 1200 and 1080p
• Frequency: 2.25 Gbps / 250 MHz
• Output video: HDMI 1.3b, HDCP
1.0 / 1.1
• Source-to-switch range: 1080p, up
to 20 m (65 ft.)
• Switch-to-display range: 1080p, up
to 15 m (50 ft.)
Video Resolutions
• VGA: 640 x 480, 800 x 600,
1024 x 768, 1920 x 1200
• DTV/HDTV: 480i/480p/576i/576p/
720p/1080i/1080p
Physical
• Dimensions: 80 x 58 x 18 mm
(3.15 x 2.28 x 0.7 in.)
• Weight: 55 g (1.9 oz.)