2
Connections
1
Connect your VGA source to
VGA Input
on the Transmitter.
2
Connect your audio source to
Audio In
on the Transmitter.
3
Connect
VGA Output
on the Transmitter to a local display device.
4
Connect
Audio Out
on the Transmitter to a local audio device (speakers,
headphones, etc.).
5
Connect
VGA Output
on the Receiver to the remote display.
6
Connect
Audio Out
on the Receiver to the remote audio device (speakers,
headphones, etc.).
7
Connect
UTP Output
(RJ45) on the Transmitter to
UTP Input
on the Receiver
using Cat5 or Cat6 cable (not included).
8
Connect the two included power adapters to the DC/5V jacks, then plug
both adapters into AC outlets.
9
Check that the Power LEDs are lit.
10
Adjust
Gain
and
Peak
as desired.
11
Attach the included brackets to the Transmitter, if desired, for mounting.
Operating Tips
•
Use only the included power adapters.
•
Use matched cable (up to 984 ft.) for proper operation.
•
Keep both units well ventilated and away from excessive heat and humidity/
moisture.
For specifications, go to www.manhattan-products.com.
11
10
TRANSMITTER
RECEIVER
4
3
2
1
6
5
9
Audio Out
VGA Output
Audio Out
UTP Output
VGA Output
VGA Input
Audio In
UTP Input
DC/5V
DC/5V
7
8
8
9
Power
7
177344_03_man.indd 2
3/28/12 4:06 PM
