Manhattan 177139, User Manual

Page: 5 / 8

5 5
Battery Charging
If the Low Power LED flashes, re-charge or change the batteries. To
re-charge, connect the mouse to the computer with the USB cable.
The mouse can be used while the batteries charge; a full charge
requires 8-10 hours. To stop charging, unplug the cable.
USB Micro Receiver
Connect the mouse’s USB micro receiver (stored upright in the slot
between the two batteries) to a USB port on the computer.
operation
• Operate the mouse within 7 m (30 ft.) of the receiver.
• Place the mouse on a white or light-colored surface — such as a
MANHATTAN laser mousepad — for optimal performance.
• When recharging, the actual charging time depends on the degree of
the discharge.
• When the mouse is not in use, set the power switch to Off. If the mouse
will not be used for an extended period of time or if you transport the
device outdoors, it’s best to remove the batteries.
• During transport, store the USB micro receiver in the slot inside the
battery compartment.
• The mouse automatically enters a sleep mode after a period of
inactivity to save power. Press any key or scroll to wake it.
• Laser synchronization is automatic: No settings are necessary.