Manhattan 158213, User Manual

Page: 5 / 8

5
Windows Vista-x64
1. Insert the included driver CD in the PC’s CD-ROM drive.
2. Enter “D:\PCI_IO\MCS9865\Vista64\P CISetup.exe,” then click “OK.”
3. Click “Install” to install the drivers.
4. Click “Exit” to complete the driver installation.
5. Shut down the PC.
6. Place the PCI card into PCI slot (see Hardware Installation below),
then power on the system.
7. Once the system boots, Windows will automatically start installing the
driver software.
Verify Windows Driver Installation
1. From the Control Panel, go to System Properties and click “Device
Manager.”
2. Find the “Ports (COM & LPT)” listing and confirm that two “High-Speed
PCI Serial Port” items are displayed.
hardware inStallation
IMPORTANT: Make sure that you’ve completed the driver installation
before proceeding with the hardware installation.
1. Turn off your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector with the
selected PCI slot on the motherboard. Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
5