Manhattan 150019, User Manual, Page: 4 / 8

SofTwAre inSTAllATion
For Windows 2000/XP/Server 2003/Vista
1. Insert the SATA 150 CardBus PC Card into an available slot.
Connect SATA cable(s) between the SATA port and SATA
device(s).
2. Windows will display “Found New Hardware Wizard” and
“Mass Storage controller.”
3. Select “Install from a list or specific location (Advanced),” then
click “Next.” Make sure the driver CD is in the CD-ROM/DVD.
4. Select “Search for the best driver in these locations,” and
check “Include this location in the search:” (uncheck the other
boxes).
5. Enter “E:\” (if your CD-ROM/DVD is E:\), then click “Browse.”
6. Check a location; e.g., “E:\SATA Express_2Port\Sil3132,” then
click “Open” and “OK.”
7. When the wizard indicates that it found a driver for the device,
click “‘Next.”
8. If the “Hardware Installation” dialog appears, click “Continue
Anyway.”
9. The wizard will now copy the required files to the system and
start the driver. After starting the driver, the wizard will display
a completion dialog. Click “Finish” to exit the wizard.
Verifying Windows 2000/XP/Server 2003/Vista Installation
1. Right-click on My Computer and select Properties. Left-click
on the Hardware tab, then click “Device Manager.”
2. Double-click on “SCSI and RAID Controllers.” If there is no
yellow exlamation point (!) or question mark (?) displayed in
front of “Silicon Image SiI 3132 SATALink Controller,” the driver
is started correctly.
3. To view information about the devices attached to the controller,
use the SiICfg Utility and click on the device from the list.
44