7
7. Insert the source Hdd in Bay A and the target Hdd in Bay B.
NOTE:
The
capacity of the target (slave) Hdd
must be greater
than the capacity of the
source (master) Hdd; otherwise, the cloning can not be properly completed.
8. When the A and B leds light, toggle the Power switch (on the rear panel) to on.
9. When the clone icon appears in your
system tray, double-click it to start the
program.
10. When the initial clone activation screen displays, click “Start.”
11. When the second prompt appears, click
“Start” again.