Use
Mangling
1. Exposing the rollers by lifting the operating rod upward.
2. Pull mangle cloth about 1/2 meters.
3. Dampen the fabric lightly with a spray bottle (not included).
4. Place the fabric cloth finishing fabric, the fabric needs bay to fit.
5. Lower operating rod operation.
6. Set the finger guard in the operating mode and control up texting on the
way into the mangle to avoid wrinkling.
7. Let mangle walk a few yards. A certain sound when the rollers go over
the fabric edge, this is quite normal. Mangel roller gets increased pres-
sure from textile edge, hence the sound.
8. Stay mangle with finger guard and lift the actuator rod so that the fabric
can be output.
The following steps are visualized in the following pages.
Never mangle garment with zippers, buttons o., Etc.,
The mangle and garments can be damaged.
If mangle exhibit noise or seems overloaded immediately switch it off!
12
