handy pillow lift
3
freedom through lightweight solutions
MI0036 issue 7
3
A
B
C
Fitting Instructions
Fit the Spreader Bar (
•
A
fig. 1) through the
pocket on the base of the Handy Pillow Lift.
The air hose (
•
B
), can be led to either side of the
bed, depending on where the compressor is
to be placed. If the hose is to be led to the left
hand side of the bed (as you lie on the bed),
the hose needs to pass through the two holes
as indicated (
C
).
Remove the pillows from the bed and place the
•
Handy Pillow Lift on the bed with the Spreader
Bar positioned up against the headboard. Fold
the strut (
D
fig.2) towards the headboard.
Connect the
•
Handy Pillow Lift air hose and the
hand control as indicated in the separate Airflo
compressor user instructions. A standard push
button hand control (
E
fig.3) is supplied with
the Airflo compressor, however, an optional
lever hand control (
F
) is also available
Place the Airflo by the side or under the bed, in
•
an out of the way position.
Partially inflate the
•
Handy Pillow Lift by pressing
‘up’ on the hand control (see separate Airflo
instructions).
F
E
1
2
D
