
Adjustable Bath & Shower Stool - User Instructions
MI0237 issue 2
The Adjustable Bath & Shower Stool by Mangar International is intended to be used in a bath or shower to
provide a stable, seated support, where a user is unable to stand for long periods.
Contents
2 x Legs.
5 x Round head screws.
5 x Spring washers.
5 x Saddle washers.
1 x Seat.
1 x User instructions.
Assembly
Tools required: Philips screwdriver.
Place the seat upside down on a flat surface
and align the legs so that the numbers
1
&
2
stamped on the legs correspond to the
numbers
1
&
2
moulded into the seat.
Fit the spring washer (
A
fig.1) and saddle
washer (
B
) to the screws (
C
) before securing
the legs to the underside of the seat as
indicated. Ensure that the screws are fully
tightened.
Height Adjustment
Adjust the legs to the desired height by
depressing the snap button (
D
fig.
2) and
sliding the leg extension up or down the frame
tube until the button snaps into the appropriate
adjustment hole.
Ensure that all four leg extensions are secured
to the same adjustment holes to ensure even
height.
WARNING:
Ensure that all four legs are adjusted
to the same height and that each snap button is
fully located.
1.
2.
1.
2.
(Model:
AB
0004)
2
1
A
B
C
Fig. 1
Fig. 2
D
freedom through lightweight solutions