Simple solutions for everyday independence
3
Handy Pillow Lift
A
B
C
Fitting Instructions
• Fit the spreader bar (
A
fig. 1) through the pocket
on the base of the Handy Pillow Lift.
• The air hose (
B
), can be led to either side
of
the bed, depending on where the compressor
is to be placed. If the hose is to be led to the
left hand side of the bed (as you lie on the bed),
the hose needs to pass through the two holes as
indicated (
C
).
• Remove the pillows from the bed and place the
Handy Pillow Lift on the bed with the spreader
bar positioned up against the headboard. Fold
the strut (
D
fig.2) towards the headboard.
• Connect the air hose from the
Handy Pillow Lift
to the Airflo 12 air outlet socket (
E
fig. 3).
•
Connect the push button hand control (
F
) to the
hand control socket (
G
).
•
Place the Airflo 12 by the side or under the bed,
in an out of the way position.
•
Partially inflate the Handy Pillow Lift
by pressing
‘Up’ on the hand control (see separate Airflo 12
user instructions).
F
D
E
G
‘Up’
‘Down’
1
2
3
