THREAD
Assembly of SQUID requires at least 2 persons. Place the guide
ring in the desired position. Set the three legs that are all the
same aside: These legs have two holes drilled right in the centre
on the top of the leg - see the illustration below.
The left leg should be attached to the left of the hole in the guide
ring and the right leg attached to the right of the hole in the guide
ring. (see ill. on the right)
The centre tube must be attached to the two legs: The holes
closest to each other fit the two legs. See the next page for at
-
taching the legs. If the centre tube cannot be attached, it or the
legs are not positioned correctly.
S UID
SMALL
MANGA STREET APS
Web
:
www.mangastreet.eu
:
manga
@
mangastreet.eu
PREPARATION
CENTRE TUBE:
Where the holes are closest
on the centre tube, the holes
must be turned towards the
right and left leg.
THE 3 LEGS
Two holes in
the centre
LEFT LEG
Two holes
to the right
2-5
RIGHT LEG
LEFT LEG
1
RIGHT LEG
LEFT LEG
DETAIL 1
see next page
DETAIL 2
See next page
GUIDE RING
THREAD
RIGHT LEG
Two holes
to the left.
R E CO M M E N DA -
TION:
The table weighs
45 kg / 99 lbs when
assembled. It is rec-
ommended to use
a pallet lifter if the
boxes or the assem
-
bled table must be
moved.
CENTRE TUBE