background image

 
 

Speaker Placement 

Page 12 

 

MNCX/MNCXS Owners Manual 

M&S Systems 

Page 5

 

The mini-cube speakers can be mounted on the ceiling or 

walls, allowing you to select the location that provides the best 

sound quality in each room. When placing your speakers the 

front and rear speakers should be separated by 6 to 8 feet for 

good stereo separation and should not be closer than 2 feet to 

any adjacent surface (wall or ceiling). 

Important! Never mount the brackets to sheetrock without 

some type of anchor. 

The center channel is best located on top of the TV cabinet or 

on a shelf above the TV and centered between the mini-cube 

speakers. 

The MNCXS system may be connected two ways depending on 

the amplifier used with the system.  The major difference is the 

subwoofer connections. 

 

1.  An amplifier with a subwoofer output connection, usually 

an RCA type connector would be the preferred 

connection when used with the MNCXS subwoofer. A 

shielded audio cable is required for this setup with a Y-

adapter connecting the audio cable to “Left and Right 

Line Level Inputs” on the subwoofer. 

 

2.  The other option requires the front left and right speaker 

cables be routed from the amplifier through the 

subwoofer to the speakers. The wires from the amplifier 

should be connected to the “Speaker Level Inputs” and 

the cables going to the speakers should be connected to 

the “Speaker Level Outputs” on the subwoofer. 

 

IMPORTANT! Make sure there are no loose strands 

of wire touching each other across the speaker or 

amplifier terminals. This can create a short circuit 

and damage your electronics. 

 

Refer to the PSW112 Subwoofer Owners Manual for additional 

information on setting up your subwoofer. 

 
Plug your amplifier or receiver in, turn it on, and enjoy your new 

music system. 

 

Speaker Placement

 

Summary of Contents for MNCX

















Reviews: