CARE AND MAINTENANCE
No maintenance is required to provide reliable operation. The MCD6 can be cleaned using
a slightly dampened cloth. No chemicals should be used to clean the face panel
components. Many common household chemicals may damage or discolor the face panel
components. Use care when cleaning the display window.
TROUBLESHOOTING TIPS
Will not power on
Magazine will not eject
“Err 07” displays when
disc is selected for play
“Err 07” displays while
disc is playing
Display does not light
“Err 01” displays
Display shows disc is
playing but nothing is
heard
Check for tripped circuit breaker.
Sliding door not opened fully.
Disc is not readable or is installed in the magazine
upside down. Disc must be installed with the label up.
Disc is dirty, damaged, or scratched.
Press Track up and Mode at the same time and hold
for 3 seconds to enable.
Disc is jammed. Try ejecting the magazine.
Shipping screws have not been removed upon
installation.
AUX is not selected on the radio-intercom master.
Check to see if FM or AM plays on the radio
intercom. If not, refer to troubleshooting section in
the owner’s guide for the radio-intercom master.
Manual Reset Procedure
In some cases, performing a reset on the MCD6 may resolve your problem. First try
resetting the MCD6 player by pressing the
TRACK UP
and
POWER
buttons at the same
time. If that does not work, remove the plastic front cover by pulling straight out and press
the
RESET
button below the keypad. If your MCD6 player still does not operate, please
contact your dealer or M&S Systems at
196.
SMARTHOME.COM(TM) 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #5076
