6
21.
NB:- Only one end of the wagon requires this process
Assemble bogies with wheel sets,
make sure all is square, fit bolster between side frames and solder up.
Photo 16.
22. The bogies are held on to the chassis with 2 x 6BA (or M3) bolts. You may find that you have to
trim some metal off the members (14) to clear the wheel sets and from the insides of the bogie
cross member to clear the head of the M3 bolt.
Photo 16.
23. This completes the model, all to do now is clean the model, paint and apply transfers, see
drawing and photos for position.
