Using the blender (with plastic blending cup)
Technical specification
•
Rated voltage :
220-240V~ 50-60Hz
•
Rated power :
300W
step 1
food
push up
surface
step 2
step 3
•
Fill the food into the Plastic Blending Cup (step 1).
•
Screw the Blending Cup Base on the Blending Cup clockwise (step 2).
•
Place the Blending Cup Base Assembly onto the Motor Base
and rotate clockwise by holding the surface of the Blending Cup
Base (step 3) to lock until you hear a slight click. The markings
on the Motor Base and the Blending Cup Base should now be
aligned with each other. If this is the case, the Blending Cup Base
Assembly is locked correctly. Now the blender is ready for use.
•
Plug in. Press the Power Button inwards and remains on as long as
the Power Button keeps being pressed.
•
After you have completed blending, Release the Power Button to
stop running.
•
After use, unplug and dismantle
•
Rotate anticlockwise to unlock and remove the Blending Cup Base
Assembly from the Motor Base.
•
Place the Blending Cup assembly downwards. Unscrew the
Blending Cup Base anticlockwise from the Blending cup and pour
out the food.
•
Warning:
The continuous operating time must be less than
1 minute. Never blend hot oil, fat or meat. Do not operating
without liquid.
•
If your blender gets blocked, first stop and unplug before clearing.
•
For the convenience of drinking clean and fresh mixture, screw the
Blending Cup Cap on the Blending Cup clockwise. The hand hook
on the Blending Cup Cap is designed for being easily portable.
Push up the snap fastener to open the outlet when drinking or
pouring out the inside mixture at any time. The Blending Cup Cap
can also be placed onto the bottom of the Cup when blending.
•
Always switch off and unplug before cleaning. Please refer to the
instruction in the “care and cleaning”.
GB-6
GB-7
