37
TPM 109/15
13.2.
Before entering the dampers into operation after their assembly and by sequential checks, the
following checks must be carried out for all designs.
Visual inspection of proper damper integration, inside damper area, damper blade, contact
surfaces and silicon sealing.
Inspection hole disassembly: release the covering lid by turning the wing nut and while turning
the lid right or left release it from the security belt. Then tilt the lid and remove it from its original
position.
13.4.
For designs 4Mx or 5Mx check of blade displacement into the position "CLOSED" can be done
after connecting the electromagnet impuls. Check of blade displacement back into the "OPEN"
position can be done after connection of actuating mechanism power supply. After check
actuating mechanism power supply has to be cutting off.
13.3.
For designs .44, .54 and .66 check of damper blade displacement can be realize after actuating
mechanism supply connection or signal connection from higher level control systems. Blade
displacement from position “OPEN” to position “CLOSED” and return displacement is checked.
14. Spare parts
14.1.
Spare parts are supplied only on basis of an order.
VIII. PRODUCT DATA
15. Data label
15.1.
Data label is placed on the damper body.
Fig. 35 Data label
Certificate:
WEIGHT (kg):
Dob
ř
íšská 550
267 24 Hostomice
MANDÍK, a.s.
Czech Republic
SMOKE CONTROL DAMPER - MSD
DESIGN:
SERIAL NUMBER:
DIMENSION:
1391
1391-CPR-2015/0057
15
EN 12101-8:2011
CLASSIFICATION: EI120 (vew-how-i o) S1500C10000AAmulti
TPM109/15
Certificate:
WEIGHT (kg):
Dob
ř
íšská 550
267 24 Hostomice
MANDÍK, a.s.
Czech Republic
SMOKE CONTROL DAMPER - MSD-W
DESIGN:
SERIAL NUMBER:
DIMENSION:
1391
1391-CPR-2015/0058
15
EN 12101-8:2011
CLASSIFICATION: EI120 (vew-how-i o) S1500C10000AAmulti
TPM109/15
Summary of Contents for MSD Round
Page 1: ......
